BELLINCIONI - Precision mounts

Monthly archives for May, 2015

July 2010


To the models “P” we made the adjustment of the latitude of 90°, in this way the mount can work both in equatorial that in altazimuth.

To achieve the movement of rotation of 90°of the axis zone, as been studied a system with reduction  gears and worm screws and has been fixed all the frame on two pivots hinge having in mod. Beta 180 mm diameter and 30 mm thick, very oversized compared to the declared capacity.

By a gripper system it is possible to make the hinging labile to adjust the timeaxis, and then restore the tightening making the whole as a box body that downloads his forces over a wide support area made with two full aluminum uprights 30 mm thick.

January 2011


We have eliminated the outer slots for movement in azimuth because they are always full of debris, that with the movement crawled between the two bases compromising the orthogonality.

We also operated on the azimuth adjustment knobw, now the mechanisms are all internal.

April 2014

7677Aafter Beta Fork mount we have made Omega Fork mount.